[c-nsp] Sup720 Redundancy Problems

[Tammy Firefly]

Hi Frank,
we did:
debug redundancy errors
debug redundancy progression
debug redundancy transport
debug redundancy status

and still only ended up with the card is being power cycled due to RF
Progression failure.

If any one wants to see the output of those commands it is here:

http://privatepaste.com/81dee2ffc9

any suggestions as to which other debugs to turn on ?


Thanks
--Tammy


On 8/16/14, 18:51:04, Frank Bulk wrote:
> Have you tried putting the chassis into "debug redundancy" to see what is
> reported?
> 
> Frank
> 
> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> Tammy Firefly
> Sent: Saturday, August 16, 2014 5:01 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Sup720 Redundancy Problems
> 
> Hi All,
> We purchased a refurbished WS-SUP720-3B for our infrastructure, we
> already had one WS-SUO720-3B in the switch, We plugged it in and it
> started booting in a loop with these messages:
> 
> Aug 16 15:54:08 MDT: %PFREDUN-SP-6-ACTIVE: Standby initializing for SSO mode
> Aug 16 15:54:09 MDT: %SYS-SP-3-LOGGER_FLUSHED: System was paused for
> 00:00:00 to ensure console debugging output.
> Aug 16 15:54:19 MDT: %PFINIT-SP-5-CONFIG_SYNC_NOT_SUPPORTED: Sync'ing
> the (boot config) configuration to the standby Router is not supported.
> Aug 16 15:54:20 MDT: %RF-SP-5-RF_RELOAD: Peer reload. Reason: RF
> Progression failure
> Aug 16 15:54:20 MDT: %OIR-SP-3-PWRCYCLE: Card in module 6, is being
> power-cycled 'RF Progression failure'
> Aug 16 15:54:21 MDT: %PFREDUN-SP-6-ACTIVE: Standby processor removed or
> reloaded, changing to Simplex mode
> 
> We then tried the the new sup in a chassis by itself, it works fine and
> we were passing traffic thru it and it was happy.
> 
> Has anyone run into this issue before?
> 
> Thank you for your help!
> 
> --Tammy
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 
> 
> 
> ----------
> 
> This email has been scanned for spam and viruses by Proofpoint Essentials cloud email security - visit the following URL to report this email as spam:
> https://us1.proofpointessentials.com/index01.php?mod_id=11&mod_option=logitem&mid=66627714&rid=1312411&report=1
>