[c-nsp] DFC3C-XL refuses to operate in XL mode

[Dimitris Befas]

My wrong about CFCs

-----Original Message-----
From: Gert Doering [mailto:gert at greenie.muc.de] 
Sent: Wednesday, July 30, 2014 4:23 PM
To: Dimitris Befas
Cc: Jiri Prochazka; <cisco-nsp at puck.nether.net>
Subject: Re: [c-nsp] DFC3C-XL refuses to operate in XL mode

Hi,

On Wed, Jul 30, 2014 at 03:47:03PM +0300, Dimitris Befas wrote:
> Remove the cfc modules from the chassis. No matter if they are admin shut.

CFC and DFC can coexist without any problem.  Documented *and* works in
practice.

Only mixing DFC/PFC and DFC/PFC-XL causes problems, so this hardware config
is weird indeed - "show modules" is all good, it really should work.

gert

--
USENET is *not* the non-clickable part of WWW!
 
//www.muc.de/~gert/
Gert Doering - Munich, Germany
gert at greenie.muc.de
fax: +49-89-35655025
gert at net.informatik.tu-muenchen.de