[c-nsp] ASA 5520 shaper > 150Mbps

[Artem Viklenko]

2016-03-14 13:09, Nick Cutting написав:
> Even on 9.1 - same limit:
> 
> mpf-policy-map-class mode commands/options:
>   <64000-154400000>  Target Bit Rate (bits per second), the value
> needs to be multiple of 8000
> 
> This command is not supported on the X models at all.
> 

Thanks Nick!

I know that shaping supported only on single-core cpu platforms.


> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf
> Of Artem Viklenko
> Sent: 14 March 2016 07:53
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] ASA 5520 shaper > 150Mbps
> 
> Hi, All!
> 
> ASA 5550 with Cisco Adaptive Security Appliance Software Version
> 8.2(5)59
> 
> Trying to shape outgoing traffic on ~290Mbps (upstream provides 
> 300Mbps).
> But ASA allows only:
> 
> 
> ASA1(config-pmap-c)# shape average ?
> 
> mpf-policy-map-class mode commands/options:
>    <64000-154400000>  Target Bit Rate (bits per second), the value 
> needs
> to be
>                       multiple of 8000
> 
> Is it possible to set shaper bigger than 150Mbps at all?
> 
> Thanks in advance!

-- 
Regards!