[c-nsp] Cat 6500/sup720 doesn't boot

[listas at cutre.net]

I can’t find IOS 12.2(17)SXF in Cisco. 

The older one is 12.2(33)…

> El 29/11/2016, a las 12:22, listas at cutre.net escribió:
> 
> Hello
> 
> In fact the CF also has a IOS (dir made in another router):
> SUP-ROU2#dir flash:
> Directory of flash:/
> 
>     2  -rw-      669827  Nov 29 2016 10:38:58 +00:00  c6msfc3-rm2.srec.122-17r.SX7
>     1  -rw-   118713700  Nov 24 2016 15:11:42 +00:00  s72033-adventerprisek9_wan-mz.122-33.SXI13.bin
>     3  -rw-    15869668  Nov 29 2016 10:42:24 +00:00  s72033-boot-mz.122-33.SXI14.bin
> 
> What amuses me is that if from the ROMMON I try to do a dir:
> rommon 3 > dir disk0:
> 
> *** TLB (Store) Exception ***
> Access address = 0x10000403
> PC = 0x8000f800, Cause = 0xc, Status Reg = 0x30409003
> 
> monitor: command "dir" aborted due to exception
> 
> I will try with 12.2(17)SXF
> 
> Regards an thanks
> 
>> El 29/11/2016, a las 12:17, Painting, Stuart <Stuart.Painting at TheAA.com <mailto:Stuart.Painting at TheAA.com>> escribió:
>> 
>> Aside from it being a boot image rather than an IOS image, there is another issue. Can ROMMON 8.1(3) boot IOS 12.2(33)SXI at all? I thought you needed (CatOS) ROMMON 8.5.4...
>> 
>> See if you can get your hands on an IOS 12.2(17)SXF image. You may have more luck booting it.
>> 
>> 
>> -----Original Message-----
>> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net <mailto:cisco-nsp-bounces at puck.nether.net>] On Behalf Of listas at cutre.net <mailto:listas at cutre.net>
>> Sent: 29 November 2016 10:51
>> To: cisco-nsp at puck.nether.net <mailto:cisco-nsp at puck.nether.net>
>> Subject: [c-nsp] Cat 6500/sup720 doesn't boot
>> 
>> Hello all
>> 
>> I got a Cat6504 with sup720 that supposely worked when it was dismounted (same company, another division) but it came without a CF.
>> 
>> So I formated a CF in another 6500, copied the IOS and tried to boot from disk0 without luck. I tried erasing nvram and I even copied a boot image and the IOS ROMMON image to the CF but I always got the same message:
>> 
>> 
>> rommon 1 > boot disk0:s72033-boot-mz.122-33.SXI14.bin
>> Loading image, please wait ...
>> 
>> 
>> *** TLB (Store) Exception ***
>> Access address = 0x10000403
>> PC = 0x8000f800, Cause = 0xc, Status Reg = 0x30409003
>> 
>> monitor: command "boot" aborted due to exception
>> rommon 2 > boot disk0:c6msfc3-rm2.srec.122-17r.SX7
>> Please reset before booting
>> rommon 3 > reset
>> 
>> System Bootstrap, Version 8.1(3)
>> Copyright (c) 1994-2004 by cisco Systems, Inc.
>> Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
>> 
>> Autoboot: failed, BOOT string is empty
>> rommon 1 > boot disk0:c6msfc3-rm2.srec.122-17r.SX7
>> Loading image, please wait ...
>> 
>> 
>> *** TLB (Store) Exception ***
>> Access address = 0x10000403
>> PC = 0x8000f800, Cause = 0xc, Status Reg = 0x30409003
>> 
>> Does anybody can provide any help or pointer to help? Cisco website wasn’t of too much hep.
>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net <mailto:cisco-nsp at puck.nether.net>
>> https://puck.nether.net/mailman/listinfo/cisco-nsp <https://puck.nether.net/mailman/listinfo/cisco-nsp>
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>