[c-nsp] Cat 6500/sup720 doesn't boot

[Saku Ytti]

On 29 November 2016 at 12:51,  <listas at cutre.net> wrote:

Hey,

> So I formated a CF in another 6500, copied the IOS and tried to boot from disk0 without luck. I tried erasing nvram and I even copied a boot image and the IOS ROMMON image to the CF but I always got the same message:

There are multiple incompatible formats. I've once formatted CF on
7200 and copied images to it, inserted it on 7600, where 7600 IOS read
it fine, but it wouldn't boot, because ROMMON couldn't read it.
Reformatted on another 7600 with similar SUP and it was good to go.

https://supportforums.cisco.com/document/21981/how-format-and-erase-flash-cisco-router
http://www.cisco.com/c/en/us/support/docs/routers/7200-series-routers/6145-pcmciamatrix.html

Perhaps your 6500 has older sup which does different format than your sup720?

-- 
  ++ytti