[c-nsp] WS-X6716-10GE in a 7600

[Bryan Holloway]

I should add that these are genuine Cisco optics, and they work in other 
modules within the same chassis.


On 9/6/17 6:07 PM, Bryan Holloway wrote:
> Anyone have any experience using a WS-X6716-10GE-3C in a 7600 chassis?
> 
> The docs indicate that support was added in IOS 15.2(2)S ... we're 
> running 15.5(3)S1.
> 
> Card boots fine, diagnostics pass, and interfaces appear in the config.
> 
> However, known working X2 GBICs we install show up as "Unknown", and the 
> "sh int transceiver" output shows very odd values (e.g., -18.1 Celsius 
> temperature (!) and 2231.8 mA (!) of current.)
> 
> Curious if anyone has used this module in that chassis successfully.
> 
> Should we just assume we have a bum card?
> 
> Thank you,
>              - bryan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/