[c-nsp] MPLS/DIA on same CPE

[James Bensley]

On 19 June 2018 at 20:48, Scott Miller <scott at ip-routing.net> wrote:
> I'm trying to come up with a config for have both MPLS (within a vrf) and
> DIA on the same router,.  I have what I thought would work all lab'd up,
> but it's not all the way there and i'm not sure what i'm missing, or if it
> will even work this way.
>
> All Cisco equipment: (configs attached)
>
> cust-switch <--> 3825   <-->   ME3600  <--> 3825  <-->  cust-switch
>
>
>
> the switch(s) have an ip address within vlan 100  .254 repectively
>
> I can see the subnet from the neighboring device in the vrf routing table,
> an can ping .2 (local to the router, on FE0/0/0) but can not ping .254 from
> remote side.
>
> Anyone able to give this a once-over would be greatly appreciated.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

Hi Scott,

Basically - what Brian said. Looks like you're missing a return route
on the .254 devices.

Also I can reach 208.123.206.234 - in my web browser from home - I'd
turn that off, or ACL it, it's a bit of a security nightmare!

Cheers,
James.