[cisco-voip] rebooting in CM 4.1.3 and 7940/60's

[Tim Medley]

Ok, I'll bite. What key combination do you use to initiate a dialplan dump
from an IP Phone?

tm

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kris Seraphine
Sent: Friday, April 08, 2005 12:12 PM
To: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] rebooting in CM 4.1.3 and 7940/60's

My guess is that they did this for a few reasons.  Previously you could not
dial a number that began with the pound key unless you went off-hook first.
I have a lot of customer's who use #01, #02, etc for speed dials and this
would trip people up.

There may have also been cases where people accidently hit the character
combination (which I can't remember right now) to do a dial plan dump on the
call managers and brought the system to its knees for a minute or two.