[cisco-voip] possible VWIC-1MFT-T1 failure

[Voll, Scott]

What code are you running on CM and what firmware on the phones.

 

I'm running CM 4.1.3 and P00307010200 on my 7940/60's.  I have started
to hear little amounts of static also (but I don't think I can reproduce
it).  I'm wondering if it's the phone load.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Ingram
Sent: Wednesday, April 20, 2005 5:05 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] possible VWIC-1MFT-T1 failure

 

When I make outbound local/long distance call's out the PRI I receive a
very loud static on the phone.  When I call into that phone from the
outside in ( 7 digit dial) the phone call is clear.

 

Scott Ingram

Manager of Network operations and Design

Clayton Services, Inc

T: 203-926-8148

F: 203-926-5751

singram at clayton.com

 

 

 

IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to
which it is addressed and may contain information that is privileged,
confidential and exempt from disclosure under applicable law.  If you
have received this message in error, you are hereby notified that we do
not consent to any reading, dissemination, distribution or copying of
this message.  If you have received this communication in error, please
notify the sender immediately  and destroy the transmitted information.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050420/18ab0e8d/attachment.html