[cisco-voip] Calling Name (inbound and outbound) not working on 3640 and NM-HDV-2MFT-T1 48

[Mark R. Lindsey]

Buffered invite; this diagram likely shows exactly what you're doing:

-------------- next part --------------
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/ 
123cgcr/vvfax_c/callc_c/sip_c/sipc1_c/chapter4.htm#wp1455447



On Mar 1, 2005, at 10:59 AM, William M. Sandiford wrote:

> So the question becomes, how to configure a 3640 with a NM-HDV-2MFT-T1  
> 48 to send and receive calling name via the Facility IE as opposed to  
> the setup message.