[cisco-voip] Call Park Partition
Lelio Fulgenzi
lelio at uoguelph.ca
Wed Mar 9 11:14:38 EST 2005
Speaking from experience, I would do my best to not put any numbers in the <none> partition. There is no way to restrict access to these numbers other than putting in specific block patterns to match. It's not so much a usage restriction, but technical. For example, if you want to create a ringdown phone to go to the PSTN, you'll have to block all numbers in the none partition, or it won't act much like a pstn line. There are others.
We've create a large range of park numbers in one partition registered to several servers without many problems. We were running 3.3.3sr4 when we did it, and are now running 3.3.4sr2. We will be upgrading to 4.1.2sr1 at the end of April.
----- Original Message -----
From: King, Jesse
To: cisco-voip at puck.nether.net
Sent: Wednesday, March 09, 2005 11:06 AM
Subject: [cisco-voip] Call Park Partition
In an early version of CM 3, I had a call park range setup without a partition and ran into problems. I can't remember what they were, but I believe it was a bug.
I am running 4.1(2), now and am revisiting call park, because the ranges are getting out of hand (two for each partition - one for each CM server).
Can anyone tell me a good reason not to have one big call park range (less than 100) in the none partition or my internal_dn partition? other than trying to restrict usage?
Thanks.
Jess
------------------------------------------------------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050309/275d0371/attachment.html
More information about the cisco-voip
mailing list