[cisco-voip] Calling Name (inbound and outbound) not workingon3640 and NM-HDV-2MFT-T1 48, Facility IE

[Wes Sisk]

The flip to MGCP.  Works fine there on 12..2T code.

/Wes

Jared Mauch wrote:

>On Wed, Mar 09, 2005 at 12:51:09PM -0500, Wes Sisk wrote:
>  
>
>>Adam,
>>
>>Looks like the feature may have been integrated in 12.3T.  Start with 
>>'isdn supp-service name calling' and go from there.  It is part of a 
>>feature that originally targeted SIP but then expanded to h323.  Not 
>>sure if the full h323 implementation is available yet.  A good question 
>>for a formal TAC case or your Cisco SE.
>>    
>>
>
>	Sigh, very annoying that there's no 2600 (non-XM) ios
>capable of handling this feature.
>
>	That plus seeing bugs being targeted for fix in 12.4, perhaps
>one should look at fixing the existing software than only fixing
>it in the new release..
>
>	Just frustrated that I can't find a release that supports
>this without doing some massive hardware upgrade, as i've already got
>max flash/dram in my 2600 boxen.  I don't need bgp and all the other
>ospf/igrp/whatnot features, just static routing and the voice (SIP+PRI)
>featureset.
>
>	Before you attempt to shunt me off to my account team or ANS
>engineer, i've already tried to find software with this featureset :(
>
>	am i just whining, or do other people see this as a major
>hurdle in their environments as well?  (too bloated with IP features
>and missing VoIP features?)
>
>	- jared
>
>  
>
>>>Interface Serial3/0:23
>>>isdn supp-service name calling
>>>isdn outgoing ie facility
>>>no isdn outgoing display-ie
>>>!
>>>      
>>>
>
> --- SNIP ---
>
>  
>
>>>CSceg80858 -- Remote-Party-ID is formatted wrong/oddly in current 
>>>releases (to be addressed in 12.4)
>>>
>>>CSCsa67646 -- SIP "486 Busy Here" messages aren't returned on some 
>>>SIP-PSTN calls
>>>      
>>>
>
>  
>