[cisco-voip] IPCC EX

[Voll, Scott]

That was what I was looking at.  The upgrade section points you back to
the install.  Install does talk about if a pervious version was on
there, but I didn't know if I had to uninstall 3.1.3 and then reinstall
3.5.2 or just over the top of 3.1.3.

Thanks

Scott

-----Original Message-----
From: Tim Medley [mailto:medley at mac.com] 
Sent: Thursday, March 10, 2005 12:25 PM
To: Voll, Scott; 'cisco-voip at puck-nether.net'
Subject: RE: [cisco-voip] IPCC EX

You do not have to format and start from scratch. All you need to do is
run
the 3.5(2) installer on your IPCC Exp server.

Take a look at the IPCC Express 3.5 installation guide.
http://www.cisco.com/application/pdf/en/us/guest/products/ps5883/c1097/c
cmig
ration_09186a00801e879e.pdf

There is a section specific to upgrades.

tm



Tim Medley

http://www.sccp2000.com IP Telephony News, Tips and Tricks

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Thursday, March 10, 2005 3:17 PM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] IPCC EX

I'm upgrading IPCC this weekend and I just assumed that I have to format
and reinstall.  Is that true or can I simple upgrade the current 3.1.3
to 3.5.2?  Can someone point me in the right direction?  If it's true
that I need to format, how can I keep the historical reporting data.
Management doesn't want to lose that.

Thanks

Scott


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip