[cisco-voip] Analog Cordless Phones

[Eric Knudson]

Anthony,

The vg248 has a configurable hookflash timer, telnet in and check
under configure->telephony->advanced settings->hook flash timer. I
would check to ensure that the port matched the phone(which also might
have a configurable hookflash timer, too).

Eric



On Thu, 17 Mar 2005 08:23:46 -0800, Anthony Mendoza <amendoza at niku.com> wrote:
> All,
> 
> I've got a situation where we would like to use wireless phones in one
> of our offices, but do not want to use the VoIP 802.11 Wireless Phones.
>   Our solution is to use one of our Analog ports off of our VG248
> Gateway.  We get dial tone and everything fine, but transferring via
> hook switch does not produce reliable results with the handset we have.
>   Is anyone doing this and can recommend a more compatible handset?
> This is for our receptionist in our UK office.  I realize your
> suggestions may only be for US brand names, but I'm quite happy to ship
> them a phone once I can verify results here in the US.
> 
> We have a TAC case open now to try and determine the incompatibility,
> but since they do not directly support analog end user devices they can
> only provide so many tips.
> 
> Thanks,
> --
> Anthony
> 
> CONFIDENTIALITY NOTICE: The information contained in this message and
> or attachments is intended only for the person or entity to which it is
> addressed and may contain confidential and/or privileged material. Any
> review, retransmission, dissemination, copying, or other use of this
> information by persons or entities other than the intended recipient is
> prohibited. If you received this e-mail or its attachments in error,
> please contact the sender and delete the material from any system and
> destroy any copies.
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
>