[cisco-voip] Ani from a POTS dial peer

[Juan]

controller T1 1/0
 framing sf
 linecode ami
 cablelength short 133
 ds0-group 0 timeslots 1-11 type e&m-wink-start
 ds0-group 1 timeslots 12-24 type e&m-wink-start
 description Connection to Switch  

Juan 
 
 
 

-----Original Message-----
From: Teodor Georgiev [mailto:tgeorgiev at is-bg.net] 
Sent: Wednesday, March 23, 2005 3:59 AM
To: Juan
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Ani from a POTS dial peer


Could you post your config (specially the ds-0 group definition).

On Tuesday 22 March 2005 19:50, you wrote:
> Hi Teodor.
> Thank you for your answer.
> The connection is by an E&M trunk.
> I need the info on how is the string that the Cisco 3640 sends to the 
> PABX (if it is sent) for authentication purposes. I suppose that the 
> method is the default one as I never changed it.
> The 3640 is getting the info from the SIP server because if I make a 
> Show call history voice last n command, I can see de caller's number.
> Regards
>
> Juan
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Teodor 
> Georgiev
> Sent: Tuesday, March 22, 2005 3:13 AM
> To: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Ani from a POTS dial peer
>
>
> What kind is the link between the 3640 and the PABX - analog, ISDN, 
> R2, SS7?
>
> If it is analog, be warned that there are several methods of 
> transmitting the caller ID. If it is ISDN, run a Q.931 debug and see 
> if any calling ID is actually going to the PBX. Run a debug against 
> the SIP to see if you are getting the caller ID from the SIP proxy.
>
> On Monday 21 March 2005 17:36, Juan wrote:
> > I need to have the ANI from the VoIP caller at my PABX.
> > My network is very simple:
> > ua--------->Sip server--------------->Cisco
> > 3640----------->PABX--------->local user
> >
> > I would like to know if there is any special command/setting I have 
> > to enter at the 3640 to have the ANI sent to the PABX.
> > The uas are registered at the SIP server with a NA phone number an 
> > is this number that I need at the PABX.
> > Thanks in advance
> > Juan
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip