[cisco-voip] IP Phone 7960 Configuration
Jon Carnes
jonc at ftnc.net
Fri Mar 25 08:36:22 EST 2005
Do you mean the setup of the switches or the phone? I can't think of
anything special to do on the phone side, so here is my take on setting up
the switch port...
In general we setup the switch with a separate vlan for voice. In most cases
I use Vlan 10 for voice and the default Vlan for data. Here is a typical
ports settings:
interface FastEthernet0/2
switchport trunk encapsulation dot1q
switchport mode trunk
switchport voice vlan 10
Good Luck,
Jon Carnes
FeatureTel
----- Original Message -----
From: "Alejandro Méndez Chávez" <rawsecurity at gmail.com>
To: <cisco-voip at puck.nether.net>
Sent: Friday, March 25, 2005 1:23 AM
Subject: [cisco-voip] IP Phone 7960 Configuration
> How is the best way to configure 7960 IP Phone on Catalyst 3550 and
> 2950 switchs?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
More information about the cisco-voip
mailing list