[cisco-voip] Panic Buttons

[Spencer Wood]

Try changing the Call supervision method to drop Loop Current on the 224 
Port.  I'm not sure if that will work for you, but it has worked for us 
with our overhead paging systems..

Spencer

************************************************************
Spencer Wood, Network Manager
Ohio Department Of Transportation
1320 Arthur E. Adams Drive
Columbus, Ohio 43221 
E-Mail: Spencer.Wood at dot.state.oh.us
Phone: 614.644.5422/Fax: 614.887.4021/Cell: 614.774.3123 
************************************************************* 



Rusty Painter <RPainter at dorchestercounty.net> 
Sent by: cisco-voip-bounces at puck.nether.net
03/29/2005 09:48 AM

To
cisco-voip at puck.nether.net
cc

Subject
[cisco-voip] Panic Buttons






Ok.  Here's what's going on.  We have Panic Buttons in all of our Judges 
chambers and on the bench.  With our old PBX phone system, the button was 
pressed, it sent a signal to dispatch, dispatch picked up the phone, and 
it turned off the "alarm".  We hooked all of these panic buttons up 
through a VG224 analog gateway.  When the button is pressed, it does call 
dispatch, dispatch picks up the phone and it quits ringing.  When the 
operator puts the phone back on hook, it starts to ring from the panic 
button again.  The only way for me to shut it off, is to reset the 
gateway.  Does this make sense to anyone?  It doesn't to me.  Does anyone 
know of any panic buttons that are known to work with VoIP?  Thanks.
 
Rusty Painter
MCP/A+
Microcomputer Technician
Dorchester County ITS
201 Johnston St.
St. George, SC 29477
Tel:           (843) 563-0022
Fax:          (843) 563-0033
E-mail:      rpainter at dorchestercounty.net
 _______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050329/ad804638/attachment.html