[cisco-voip] MWI and Multi -Tenanting

Tue Apr 18 02:31:17 EDT 2006

So does this only work with MGCP or what?

Jason Wydra

Consultant

burwood group, inc.

Phone: (312) 327-4677

Cell: (312) 493-2834

jwydra at burwood.com

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick Bergquist
Sent: Tuesday, April 18, 2006 12:04 AM
To: Wydra, Jason; Craig M Staffin
Cc: cisco-voip-bounces at puck.nether.net; cisco-voip at puck.nether.net;
Darren Smith
Subject: Re: [cisco-voip] MWI and Multi -Tenanting

The gateway page on CCM lets you prefix digits on inbound calls... 

----- Original Message ----
From: "Wydra, Jason" <jwydra at Burwood.com>
To: Craig M Staffin <CMStaffin at ra.rockwell.com>
Cc: cisco-voip-bounces at puck.nether.net; cisco-voip at puck.nether.net;
Darren Smith <darren at silvercommunities.com.au>
Sent: Monday, April 17, 2006 11:49:45 PM
Subject: Re: [cisco-voip] MWI and Multi -Tenanting

Good point, but if telco only sends the last 4 digits then you're hands
are tied. EXAMPLE:

357-4600

542-4600

Telco only sends four digits....... Nothing you can do on the gateway or
CCM as far as I know.

Jason Wydra

Consultant

burwood group, inc.

Phone: (312) 327-4677

Cell: (312) 493-2834

jwydra at burwood.com

________________________________

From: Craig M Staffin [mailto:CMStaffin at ra.rockwell.com] 
Sent: Monday, April 17, 2006 11:46 PM
To: Wydra, Jason
Cc: cisco-voip at puck.nether.net; cisco-voip-bounces at puck.nether.net;
Darren Smith; Tim Medley
Subject: Re: [cisco-voip] MWI and Multi -Tenanting

or better yet change it at the gateway and CCM is none the wiser. 

We do all of our digit manipulation at the gateway level. 

I agree with you a solid dial plan solves so many problems 

"Wydra, Jason" <jwydra at Burwood.com> 
Sent by: cisco-voip-bounces at puck.nether.net 

04/17/2006 11:38 PM 

        To:        "Tim Medley" <medley at mac.com>, "Darren Smith"
<darren at silvercommunities.com.au> 
        cc:        cisco-voip at puck.nether.net 
        Subject:        Re: [cisco-voip] MWI and Multi -Tenanting

Forgive my idiotic question and somewhat asinine comment but...... Why
do so many providers of IPT CCM service feel like they need to overlap
multi-tenant extensions? Are there not enough numbers??? Do we have an
issue like we sort-of have between IPV4 and IPV6. I doubt it.... Easy
solution is don't overlap dialplans by having a solid design from the
get go. If you have the same last four digits in the DID range then just
call telco and have them send 7 digits instead of four. 

Jason Wydra 
Consultant 
burwood group, inc. 
Phone: (312) 327-4677 
Cell: (312) 493-2834 
jwydra at burwood.com <mailto:jwydra at burwood.com>  

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim Medley
Sent: Monday, April 17, 2006 11:16 PM
To: Darren Smith
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MWI and Multi -Tenanting 

Darren, 

I've setup multi-tenant CCM systems several times.  A couple of
questions. 

How do you have the MWI on/off DN's configured in CCM? Are they in the
same generic partition that your phone DN's are in? You will need to set
the MWI on/off numbers to a partition that all tenants have access to
AND the CSS that the Unity port(s) that are set for MWI will need access
to the Tenant Partitions. 

tm 

Tim Medley 
medley at mac.com <mailto:medley at mac.com>  

On Apr 18, 2006, at 12:05 AM, Darren Smith wrote: 

Hi, 

Has anybody succesfully implemented MWI with multi tenanting on CCM
4.1.3 and Unity 4.0.5?? 

We have multiple customers on our callmanager and unity platform, some
of these are smaller business, ad each of these has their own
Partitions, and each of these partitions use the same DN range (eg
200x). 

Other customers are in a generic partition, and their DN is their full
DDI number. 

We have set the MWI numbers (Full 10 digit numbers), but cannot get MWI
to work. 
The option for multi tenanting is set to turue within Callmanager
Messaging Interfaces services, but I'm sure I need some transaltion
patterns set, but can't work out what to do. 

Thanks in advance 

Regards 

Darren Smith
Chief Operations Officer
Silver Communities 

P 1300786755
D 0756575299
M 0405 847791
E darren at silvercommunities.com.au
<mailto:darren at silvercommunities.com.au>  

________________________________

DISCLAIMER: This email, together with any attachments, is intended for
the named recipient(s) only; and may contain privileged and confidential
information. If received in error, you are asked to inform the sender as
quickly as possible and delete this email and any copies of this from
your computer system network.
If not an intended recipient of this email, you must not copy,
distribute or take any action(s) that relies on it; any form of
disclosure, modification, distribution and /or publication of this email
is also prohibited.
Unless stated otherwise, this email represents only the views of the
sender and not the views of Silver Communities Pty Ltd. 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
 _______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060418/2e7c8562/attachment-0001.html 