[cisco-voip] 7920, ACS and AP 1200

[Brad Rogers]

Yes.

 

________________________________

From: Stu Packett [mailto:SPackett at fenwick.com] 
Sent: Friday, June 02, 2006 12:04 PM
To: Brad Rogers; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 7920, ACS and AP 1200

 

Are you also setting up the phone to use LEAP by entering the same LEAP
username and password to match the LEAP username and password in ACS?

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brad Rogers
Sent: Friday, June 02, 2006 9:29 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7920, ACS and AP 1200

Does anyone have a configuration example for a 7920 on a 1200 series
access point and ACS?  I can get the phone to authenticate using 128 bit
WEP, but when I try to use LEAP authentication fails.  LEAP is enabled
in the ACS and I have setup a username and password.

 

Brad Rogers

Network Systems Analyst

Pasadena ISD - Network Services

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060602/b6f9d7ca/attachment.html