[cisco-voip] CM 5.0

Jonathan Charles jonvoip at gmail.com
Thu Jun 8 12:52:01 EDT 2006


Install Windows 2003 and install VMWare and follow the doc...



Jonathan

On 6/8/06, Goran Selthofer <selt9 at yahoo.com> wrote:
> jonathan, i have tried it on IMB eSeries with 16GB RAM and 160GB HDD, both
> IDE and SCSI... the same error... "not supported HW..."
> my CCM is version 5.0.2.9001-59
> any hope?
>
>
> Jonathan Charles <jonvoip at gmail.com> wrote:
>
>  I have followed that procedure at least 9 times and all have been
> succesful (failed for other reasons (mainly a faulty DMA backup)).
>
> You need to give it a minimum of 1GB of RAM (I did 2GB) and a 72GB
> drive... use the LSI SCSI drive.
>
> It has worked every time for 5.0(2)...
>
>
>
> Jonathan
>
> On 6/8/06, Goran Selthofer wrote:
> > please see the last message on that forum...
> > the procedure is not correct for ccm 5.0.2 ... because I have tried
> several
> > times and failed...
> >
> >
> > Jonathan Charles wrote:
> >
> > Apologies, this was posted, but I thought to the group, apparently it
> > was sent only to me (apologies in advance if the intent was to not
> > share it)...
> >
> >
> http://www.vmware.com/community/thread.jspa?messageID=399465��
> >
> >
> > BTW, I didn't have to do the boot off of red hat cd thingy... However,
> > it definitely took a long time for core services to start after bootup
> > (about 10 mins).
> >
> > Is there any way to get a demo license for lab use? Just five phones
> > or something...
> >
> >
> >
> > Jonathan
> >
> > On 6/7/06, Goran Selthofer wrote:
> > > that is right!
> > > vmware has this fix mac address format and you can not change it.
> > > you have to licence it with demo licence made just for vmaware
> > > installations...
> > > regarding the procedure of mac changing, you should change it by editing
> > vmx
> > > file...
> > >
> > > stil, noone answered to my question about exact procedure for vmware
> > > installation of CM 5.0.2 version?
> > > thanks
> > >
> > >
> > > Jonathan Charles wrote:
> > >
> > > OK, so I can get CCM5 running on VMWare, but how do I change the MAC
> > > address of the VM so I can license this thing?
> > >
> > > I have a license file but I am apparently very limited on what MAC
> > > addresses I can specify for VMWare.
> > >
> > > Apparently, VMWare only lets you assign MACs of this format:
> > >
> > > 00:50:56:XX:YY:ZZ
> > >
> > >
> > >
> > > Jonathan
> > >
> > > On 5/30/06, Frazee, Timothy wrote:
> > > >
> > > >
> > > >
> > > >
> > > > I am running CCM 5.0.1 on GSX 3.2.0.
> > > >
> > > >
> > > >
> > > > The problem I have is I have tried to duplicate the install to write a
> > > > procedure, and it completes the install with no errors. When I try to
> > boot
> > > > the newly installed system, it freaks out at GRUB and gives me an
> error.
> > I
> > > > have looked up the error code and it describes a problem loading the
> > > > partition with GRUB. There seems to be no "repair" type of option.
> > > >
> > > >
> > > >
> > > > I have successfully installed 5.0.1 on vmware Workstation
> > > 5.5.latestversion
> > > > many times. Unfortunately the install fails when I try to make a new
> > > legacy
> > > > vm that I can move to GSX.
> > > >
> > > >
> > > >
> > > > I have a feeling that when this is released to "public" it will be so
> > > > cranked down, it will be hard to install in vmware without some
> > tweaking.
> > > >
> > > >
> > > >
> > > > I have not tried to upgrade a 5.0.1 running in vmware with the
> > > downloadable
> > > > files from cco.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Timothy Frazee
> > > >
> > > > Network Solutions
> > > >
> > > > 314.249.8697 cellular phone
> > > >
> > > > ________________________________
> > > >
> > > >
> > > > From: Goran Selthofer [mailto:selt9 at yahoo.com]
> > > > Sent: Tuesday, May 30, 2006 7:32 AM
> > > > To: Frazee, Timothy; Voll, Scott; ciscovoip
> > > >
> > > > Subject: Re: [cisco-voip] CM 5.0
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Timothy,
> > > >
> > > > please give us the exact CCM version you have?
> > > > I have tried to run 5.0.2 on VMWARE GSX and Workstation and I have
> > failed
> > > > both times with the same code:
> > > > something like "Not supported hardware..."
> > > >
> > > > also, some procedure will be highly appreciated :)
> > > >
> > > > Thanks,
> > > > Goran
> > > >
> > > > "Frazee, Timothy" wrote:
> > > >
> > > >
> > > > I have it running on vmware GSX server 3.2.0. Works well. I troubles
> > > getting
> > > > the installer to not freak out. You have to be real specific and
> emulate
> > a
> > > > red hat enterprise server 3. When I selected RHES 4, the installer
> would
> > > > hang.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Timothy Frazee
> > > >
> > > >
> > > > Network Solutions
> > > >
> > > >
> > > > 314.249.8697 cellular phone
> > > >
> > > > ________________________________
> > > >
> > > >
> > > >
> > > > From: cisco-voip-bounces at puck.nether.net
> > > > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf
> > Of
> > > > Voll, Scott
> > > > Sent: Friday, May 26, 2006 9:47 AM
> > > > To: ciscovoip
> > > > Subject: [cisco-voip] CM 5.0
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Has anyone had the opportunity to get CM 5.x running on non-cisco
> > servers?
> > > > I'm thinking I would really like to put it in a lab environment.
> > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Scott
> > > >
> > > > ________________________________
> > > >
> > > >
> > > > This message and any attachments are intended only for the use of the
> > > > addressee and may contain information that is privileged and
> > confidential.
> > > > If the reader of the message is not the intended recipient or an
> > > authorized
> > > > representative of the intended recipient, you are hereby notified that
> > any
> > > > dissemination of this communication is strictly prohibited. If you
> have
> > > > received this communication in error, please notify us immediately by
> > > e-mail
> > > > and delete the message and any attachments from your system.
> > > >
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > >
> > > >
> > > > ________________________________
> > > >
> > > >
> > > > New Yahoo! Messenger with Voice. Call regular phones from your PC and
> > save
> > > > big.
> > > >
> > > >
> > > >
> > > > ________________________________
> > > > This message and any attachments are intended only for the use of the
> > > > addressee and may contain information that is privileged and
> > confidential.
> > > > If the reader of the message is not the intended recipient or an
> > > authorized
> > > > representative of the intended recipient, you are hereby notified that
> > any
> > > > dissemination of this communication is strictly prohibited. If you
> have
> > > > received this communication in error, please notify us immediately by
> > > e-mail
> > > > and delete the message and any attachments from your system.
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Tired of spam? Yahoo! Mail has the best spam protection around
> > > http://mail.yahoo.com
> >
> >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam protection around
> > http://mail.yahoo.com
>
>
>
>
>  __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com



More information about the cisco-voip mailing list