[cisco-voip] AD plugin on a W2k3 Domain
Jason Burton
jburton at NETechCorp.com
Tue Jun 13 11:08:29 EDT 2006
Thanks, downloading Ethereal now.
From: Kevin Thorngren
Sent: Tue 6/13/2006 11:01 AM
To: Jason Burton
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets should
help you see what the failure is.
Kevin
On Jun 13, 2006, at 10:52 AM, Jason Burton wrote:
> Nope, just a router on a stick.
>
> From: Voll, Scott
> Sent: Tue 6/13/2006 10:50 AM
> To: Jason Burton; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] AD plugin on a W2k3 Domain
>
> Is there any pix between the CM and AD? If so, we ran into a problem
> with the fixup 389.
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Burton
> Sent: Tuesday, June 13, 2006 7:43 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] AD plugin on a W2k3 Domain
>
> I'm trying to install the AD plugin and keep getting the following
> error:
>
> Error:Setup failed to connect. Please enter your Host Name, Port
> Number, Directory Administrator DN and Password again!
>
> I've verified these 100 times over and still no luck. This is the
> first time I've tried this to a widnows 2003 domain. Any ideas?
>
> Thanks in advance!!
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060613/97112fe8/attachment.html
More information about the cisco-voip
mailing list