[cisco-voip] debug isdn q931

[Justin Steinberg]

I believe you should check for this config:

Router(config)#logging monitor 7

Justin


On 6/15/06, Ed Leatherman <ealeatherman at gmail.com> wrote:
> I'm fairly certain this is something I am doing wrong but I cant find it for
> the life of me..
>
> I have 2 ISR routers, 3825 with some T1 interfaces and DSPs for
> conferencing. identical firmware loads and configurations, other than 1 has
> an FXO card that the other doesn't.
>
> I'm executing on both routers from seperate SSH sessions:
> # term mon
> # debug isdn q931
>
> On router A, I can see all the Q931 debug messages go by. On router B, I see
> nothing on the SSH session however I know calls are being placed on it ( I
> can see the channels going in service etc from RTMT). Could I have something
> turned off on router B that doesnt show up in the config?
>
> --
> Ed Leatherman
> IP Telephony Coordinator
> West Virginia University
> Telecommunications and Network Operations
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>