[cisco-voip] debug isdn q931

[Hassan Salama]

did you execute term monitor?

#term mon

Thanks
--- Mark Borchers <mborchers at igillc.com> wrote:

> Have you set your logging level high enough to show
> debug traffic?  See the
> logging console command args.
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Ed Leatherman
> Sent: Thursday, June 15, 2006 10:26 AM
> To: ciscovoip
> Cc: jeff.davis at mail.wvu.edu
> Subject: [cisco-voip] debug isdn q931
> 
> 
> I'm fairly certain this is something I am doing
> wrong but I cant find it for
> the life of me..
> 
> I have 2 ISR routers, 3825 with some T1 interfaces
> and DSPs for
> conferencing. identical firmware loads and
> configurations, other than 1 has
> an FXO card that the other doesn't. 
> 
> I'm executing on both routers from seperate SSH
> sessions:
> # term mon
> # debug isdn q931
> 
> On router A, I can see all the Q931 debug messages
> go by. On router B, I see
> nothing on the SSH session however I know calls are
> being placed on it ( I
> can see the channels going in service etc from
> RTMT). Could I have something
> turned off on router B that doesnt show up in the
> config? 
> 
> -- 
> Ed Leatherman
> IP Telephony Coordinator
> West Virginia University
> Telecommunications and Network Operations 
> 
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com