[cisco-voip] CME, CUE and T1 trunk with 3845

[netwirker]

Hi Jim,

I just want to confirm in your case CUE, CME and T1(or E1) line running in one router?
I am very concern about this...
  

======= 2006-06-16 07:32:09 您在来信中写道：=======

>Don't run Debugs on the TFTP server and u should be ok....
>I have a few 2851s doing this.. With near max phone counts..
>3845 ? Not a 25?  
>
>Vwic2-1mftt1/e1
>
>Voice quality? Never seen that except on a poor design or misconfig..
>
>J
>
>-----Original Message-----
>From: cisco-voip-bounces at puck.nether.net
>[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of netwirker
>Sent: Friday, June 16, 2006 12:59 AM
>To: cisco-voip
>Subject: [cisco-voip] CME, CUE and T1 trunk with 3845
>
>Hi guys,
>
>I will set up CME, CUE and install one PSTN PRI T1 in one Cisco 3845
>based on customer request.
>I didn't configure these services in one router before and wondering if
>Cisco router can stand the burden and performance well. As my experience
>CUE and T1 link can't install in one router otherwise serious voice
>quality problem will happen. What's your idea, any suggestion to
>optimize performance?
>Client want to set up 120 phone on CME and 200 mailbox on CUE.
>
>Btw, what T1 module I need install for 3845 if I need DID feature?
>
>Thanks a lot!  
>
>Andrew Xue
>netwirker at gmail.com
>