[cisco-voip] what the best way to create a back door for VM

[Carter, Bill]

We just call our main number and hit * and get "please enter your ID" 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Thursday, June 15, 2006 2:03 PM
To: James Grace
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] what the best way to create a back door for VM

Just take a spare DID, route it through a CTI RP that is CFA into vm.
Then in Unity make a call routing rule that sends callers to subscriber
sign in.

-Ryan

On Jun 15, 2006, at 2:46 PM, James Grace wrote:

Ive seen site the has a back door number config on there system.   
When you call it,  it goes direct to "please enter your ID"



James D. Grace

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


This email may contain proprietary and confidential information for the sole use of the intended recipient. 
Any review, retransmission, dissemination, or other use of this information by persons or entities other than 
the intended recipient is prohibited. If you are not the intended recipient, please contact the sender and 
delete all copies. To the extent that opinions are expressed in this message, they are not necessarily the 
opinions of Sentinel Technologies or any of its affiliates, employees, directors, officers or shareholders.