[cisco-voip] Operator setup

[Voll, Scott]

simple translation pattern should work for this.
 
Scott

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Bob A. Bowie
Sent: Fri 6/23/2006 10:22 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Operator setup



In a call manager system I have my operator attached through a pbx, can I
make it so users can just dial "0"
and convert this to a seven digit number to dial thru to the pbx?

Also, if I have a range of extensions from 1001 - 1010, I would like anyone
who dial 1002-1010 to be directed to 1001?
Is this possbile in CM 4.1.3?  All extensions should have full dial out
capability

Thanks
Bob


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060625/8b909eae/attachment.html