[cisco-voip] Basic VOIP Setup Needs

[Dixon, Wayne]

The Switches are 3500XLs... It is an Avaya system, and call managing
will be handled by that and forgive my ignorance, but what is A VGW?
Voice Gateway?
 
If it is a Voice Gateway, then we're still awaiting that to come in, we
just ordered that last week.. but I was asked to see what would be
needed to get the network ready for IP Phones
 
Wayne
 

	-----Original Message-----
	From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
	Sent: Monday, June 26, 2006 9:50 AM
	To: Dixon, Wayne; cisco-voip at puck.nether.net
	Subject: RE: [cisco-voip] Basic VOIP Setup Needs
	
	
	  

	What kind of Switch?

	 

	Do you already have CM and VGW's setup?

	 

	Scott

	 

	
________________________________


	From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dixon, Wayne
	Sent: Monday, June 26, 2006 7:24 AM
	To: cisco-voip at puck.nether.net
	Subject: [cisco-voip] Basic VOIP Setup Needs

	 

	Hi all, 

	 

	I'm wondering what basics are needed for allowing IP Phones
access on a Cisco Switch network...   We are looking at implementing
some IP Phones.  

	 

	I'm assuming that a Dedicated VLAN for the IP Phones, use of
Native VLAN for non-tagged packets and a DHCP server are needed... but
I'm not sure what else is needed.  

	 

	If anybody has a good source for some basic information on basic
VOIP setup would be greatly appreciated.

	 

	Thanks

	 

	Wayne

	 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060626/619e2dc0/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2950 bytes
Desc: image001.jpg
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060626/619e2dc0/attachment.jpe