[cisco-voip] 7941/7961 Tone Generator

Jason Aarons (US) jason.aarons at us.didata.com
Tue Jun 27 22:50:08 EDT 2006


Is there another instrument/test tool that would generate 1004 Hz tone
at -15 dB besides the phone to test ERL?

 

Is there a workaround for measuring ELR if the phone won't generate a
test tone.

 

Would a T-BERD or similar measure ERL in a T1 CAS environment?

 

________________________________

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, June 27, 2006 10:26 AM
To: Jason Aarons (US)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 7941/7961 Tone Generator

 

CSCee44462 - Need ability to generate inband test tone on 7970 like 7960
does

 

/Wes

 

On Jun 27, 2006, at 11:47 AM, Jason Aarons ((US)) wrote:

 

**3 turns on "Debug Mode" on a 7941, however I don't get a Tone
Generator softkey when placing a call.  I've done this before on
7940/7960s with no issues.

 

Anyone tried the 41/61/70 ? These phones run a Java applet...

 

 

http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09
186a00800945bd.shtml#testtone

 

________________________________

 

 


Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.

_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-voip

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060627/7542f8a0/attachment.html 


More information about the cisco-voip mailing list