[cisco-voip] Parked and Hold Calls Dropped at 50 Seconds
Kevin Thorngren
kthorngr at cisco.com
Wed Jun 28 19:28:33 EDT 2006
Does this happen with IP Phone to IP Phone calls or with calls through
a GW or both?
If you are experiencing the problem with an MGCP GW try the command "no
mgcp timer receive-rtcp". If this doesn't help please describe more
about the call flow and the devices involved when the failures happen.
Kevin
On Jun 28, 2006, at 6:55 PM, Pritchard, Jon wrote:
> Does anyone know what parked calls and calls on hold being dropped at
> exactly 50 seconds is a telltale sign of?
>
> In a cluster with 7 sites there is one site which is experience this
> problem. All the other sites work fine. No service parameters are
> even close to 50 seconds (or 5000 milliseconds). Both internal and
> external calls are affected. SQL replication appears to be fine.
> Rebooting CallManagers does not change behavior. Never seen anything
> like this in 5 years. Any insight would be appreciated.
>
> Jon Pritchard
>
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and
> confidential. If the reader of the message is not the intended
> recipient or an authorized representative of the intended recipient,
> you are hereby notified that any dissemination of this communication
> is strictly prohibited. If you have received this communication in
> error, please notify us immediately by e-mail and delete the message
> and any attachments from your system.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
More information about the cisco-voip
mailing list