[cisco-voip] my remote ipphone will not pull ringlist

Ryan Ratliff rratliff at cisco.com
Thu Mar 2 12:20:23 EST 2006


Depends on when the problem started and how many changes they've made  
since.  A good test would be to change the CM group on one or more of  
the 7920s, then reset the phone and see if it registers with the  
right server.

-Ryan

On Mar 2, 2006, at 12:16 PM, Jonathan Charles wrote:

If there was a TFTP connectivity issue, wouldn't they also see  
problems d/l phone configs, MGCP gateway configs, etc? It seems they  
would be seeing more serious problems than just ring list issues.



J

On 3/2/06, Wes Sisk <wsisk at cisco.com> wrote: these are passed by  
TFTP. check your TFTP connectivity. look at a
sniffer trace or the TFTP traces on the CM server.

James Grace wrote:
 >
 > For some reason we have iphone 7970 and 7920 at a remote site it is
 > connect by site to site vpn both ipphone work fine. But we have  
custom
 > ring tone on our cm server at the main site. But they don't show  
up on
 > our two remote ip phone
 >
 > James D. Grace
 >
 > **CCNP CCNA MCSE MCDBA**
 >
 > Sr. System Engineer / Professional Svc.
 >
 > **Digitel Corporation**
 >
 >  
------------------------------------------------------------------------
 >
 > _______________________________________________
 > cisco-voip mailing list
 > cisco-voip at puck.nether.net
 > https://puck.nether.net/mailman/listinfo/cisco-voip
 >

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



More information about the cisco-voip mailing list