[cisco-voip] Using fax with ATA SCCP
Fedorov, Konstantin
kfedor at amt.ru
Tue Mar 7 09:39:36 EST 2006
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administr
ation_guide_chapter09186a00801e0e0d.html#wp1037094
and
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a00801
44630.shtml
In general, You must not worry about SRST/ ATA will register.
But to save fax functionality you also must configure
ccm-manager fallback-mgcp
-----------------------
Sincerely Yours,
Konstantin Fedorov
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ciscozest
Sent: Monday, March 06, 2006 3:58 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Using fax with ATA SCCP
I have MGCP/SRST gateway with ATA SCCP and a fax machine connect to it
in branch office. The CallManager is in HQ. When
SRST mode is active, I know IP Phones (SCCP) are able to register to
SRST gateway and still function properly. How about
the ATA? Does it able to failover/register with SRST gateway and
maintain my fax functionality during SRST mode? If not,
any suggestion to eliminate this problem? thanks
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list