[cisco-voip] Cisco 827 adsl + ipsec voip issues

[Juan Pablo Feria Gomez]

The voice is received on the router, it has 4 voice ports...

i already solved it with the following additional config...


!
voice service voip
 h323
!
interface Ethernet0
 ip address 192.168.15.1 255.255.255.0
 ip nat inside
 h323-gateway voip interface
 h323-gateway voip bind srcaddr 192.168.15.1


With that, the calls src address is the eth0 ip, not the dialer 1 ip


Thanks for responding



On 3/9/06, Fedorov, Konstantin <kfedor at amt.ru> wrote:
> Hi,
>
> Pls, clarify.
>
> Is phone connected to 827 or this is IP phone located in the x.x.x.x
> net?
> Do you have nat/pat configured on 827 ?
> What is the protocol do you use ? h323, SIP ?
>
>
> -----------------------
> Sincerely Yours,
> Konstantin Fedorov
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Juan Pablo
> Feria Gomez
> Sent: Friday, March 03, 2006 7:33 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Cisco 827 adsl + ipsec voip issues
>
> Hi, all I have a Cisco 827 with:
>
> ADSL Port
> Ethernet
> Crypto Support
> Nat
>
> x.x.x.x-----|ROUTER827|--y.y.y.y
> (dsl)-------internet------|ROUTER|...z.z.z.z
>
>
> I have an ipsec link to communicate x.x.x.x and z.z.z.z nets, its
> working fine, when i set up a voip call from z.z.z.z to the 827 router
> (the pot points to the x.x.x.x ip on the router)  the 827 router tries
> to answer the call through the dialer interface (the piblic ad sl link
> y.y.y.y) and cant reach the z.z.z.z network...
>
> Are there a way to force a voip pot to make the connections from the
> ip of the ethernet interface as the source address to find the remote
> ip through  the vpn?
>
> Thanks in advance
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>