[cisco-voip] Transfer to MeetMe from Unity

[Brian Henry]

Did you set you tranfer rule to allow it?
--------------------------
Sent from my BlackBerry Wireless Handheld
 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
To: Adam Blomfield
CC: Cisco Voip
Sent: Sat Mar 11 15:11:24 2006
Subject: Re: [cisco-voip] Transfer to MeetMe from Unity

It is opened by an internal subscriber... After which, someone else dials into the call handler and I want them to be able to transfer into the meetme (that has already been opened).



Jonathan


On 3/11/06, Adam Blomfield <adman at adman.net> wrote:

	On 3/11/06, Jonathan Charles <jonvoip at gmail.com> wrote:
	> OK, so, I created a boat-load of MeetMe numbers, and I want to be able to
	> have users be able to call a DID, and hit a call handler in unity that says, 
	> 'enter a conference id'... and then transfer them to that meetme conference
	> (which is opened by an internal subscriber).
	>
	> However, I keep getting a 'you can not be transferred to this number, check 
	> the number and try again' from unity if I use the caller system transfer...
	> I have confirmed the conference is active...
	>
	> If I try to just dial the meetme extension during the greeting, I get 'i did 
	> not recognize that as a valid entry' from unity...
	>
	>
	>
	> What am I missing?
	>
	>
	> Unity version is 4.1(1)
	>
	> Though it might be 4.2(1) in another hour or so... 
	
	MeetMe numbers have to be activated from a 79XX handset using the
	softkeys. TTBOMK there's no way to have them just sitting open at all
	times waiting for someone to dial in.
	
	-Adam
	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060311/bb7a652e/attachment.html