[cisco-voip] Using Cisco User Pages

[Ryan Ratliff]

In the CCMUser page each phone associated to your user is available  
to configure via a drop-down box.   Speed dials, etc can be assigned  
by first choosing the phone and then configuring them as normal.

-Ryan

On Mar 19, 2006, at 8:19 AM, Miller, Steve W. wrote:

If you have three different phones (2 7960s and a 7960 Communicator),  
is it possible to add speed dial numbers at the same time to appear  
on all three phones?

If not, is it possible to put them on all three phones by any means?

Thank you!

Steve W. Miller
Telecom Engineer
HOWREY, LLP
Office IT103 (on B3 Level)
1299 Pennsylvania Ave, NW
Washington, DC 20004
202-383-6949 (11-6949)




------------------------------------------------------------------------ 
-------------------------
This email and any attachments contain information from the law firm  
of Howrey LLP, which may be confidential and/or privileged.
The information is intended to be for the use of the individual or  
entity named on this email.
If you are not the intended recipient, be aware that any disclosure,  
copying, distribution or use of the contents of this email is  
prohibited.
If you receive this email in error, please notify us by reply email  
immediately so that we can arrange for the retrieval of the original  
documents at no cost to you.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip