[cisco-voip] 7941G and 7961G phone models

[Carter, Bill]

Going forward buy nothing but 79X1 models.  They have better resolution,
802.af Power, and more memory.  The additional memory is required if you
convert to SIP.  I have used these phones and the are fine, no problems,
just better looking than the 79X0 models. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Candace Holman
Sent: Tuesday, March 21, 2006 3:37 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7941G and 7961G phone models

What is the minimum CallManager version that these phone work with?  Any
problems with 3.3.5+ or 4.x ?

Has anyone got feedback, good or bad, on these models?

thanks,
Candace

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


This email may contain proprietary and confidential information for the sole use of the intended recipient. 
Any review, retransmission, dissemination, or other use of this information by persons or entities other than 
the intended recipient is prohibited. If you are not the intended recipient, please contact the sender and 
delete all copies. To the extent that opinions are expressed in this message, they are not necessarily the 
opinions of Sentinel Technologies or any of its affiliates, employees, directors, officers or shareholders.