[cisco-voip] CM 4.1 g.711 conferencing

[Roeseler, David]

What's the simplest and inexpensive transcoder/hardware cfb I can get
for the users.
I need to allow ad-hoc conferences for g729 ip phone users.

Thanks

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Thursday, March 23, 2006 12:51 PM
To: Roeseler, David
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM 4.1 g.711 conferencing

The limitation is in your conference bridge.   The software CFB only  
supports g.711 so any g.729 leg of a conference call would require a  
transcoder (or hardware CFB).

-Ryan

On Mar 23, 2006, at 12:44 PM, Roeseler, David wrote:

Is ad-hoc conferencing limited to G711 in CM 4.1.3?


I have g729 phones that need to conference and get the message  
"cannot complete conference"

When trying to establish the conference.


Thanks




_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip