[cisco-voip] 4506 sw is not see cdp ip phones
James Grace
jgrace at digitelusa.net
Fri Mar 24 10:00:48 EST 2006
We are trying to see up a new vlan on a 4506 for voice. We configured the
sw ports for the cm gw and the phone just like we always do. But for some
reason if I do a show cdp neighbor all the phones will not show up. And
sometimes I can run the cmd and see 2 phone and then run it again a sec
later and it will only show one. I change the cdp timer to 5 from 60, and
no differents. This first time I notice I was having a issue is when the
phone would not get a ip address from the pool I configure on the switch,
sometime it will get one from the date remote dhcp server or not at all
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060324/3f46085c/attachment.html
More information about the cisco-voip
mailing list