[cisco-voip] trying to setup dhcp scope for iphones on dc
Lelio Fulgenzi
lelio at uoguelph.ca
Sun Mar 26 23:50:16 EST 2006
Is this a new install? i.e., have the phones got an IP address from a DHCP server before? If new, and your DHCP server is not on the same broadcast domain as the phones, you have to put an 'ip helper address' or similar on the router interface. If this is an additional DHCP server, I remember that Windows wants all DHCP servers to be registered with each other or something like that. If the phones already had an IP address, they will try to 'renew' the existing IP address, so you'll have to make sure that that scope no longer exists.
If you can give us some more details, that would help.
----- Original Message -----
From: James Grace
To: cisco-voip at puck.nether.net
Sent: Sunday, March 26, 2006 10:16 PM
Subject: [cisco-voip] trying to setup dhcp scope for iphones on dc
Is there trick to get the ip phone to grab a ip address from the dhcp server. We have a dc which is a dhcp server for our data. And we are configuring another scope for the ip phones. But phones are not grabing a ip. We have the ip helper config under the voice vlan int. what else are we missing.
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
------------------------------------------------------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060326/c723b8c7/attachment.html
More information about the cisco-voip
mailing list