[cisco-voip] ISDN Error with VIC2-2BRI-NT/TE

Ahmad Cheikh Moussa acm at netuse.de
Wed Mar 29 08:23:27 EST 2006


Hi!

I have a problem using a VIC2-2BRI-NT/TE=.
Everytime I use this bri if, I got htis error message
.Mar 29 14:57:18.865 MEST: %ISDN-4-ISDN_UNEXPECTED_EVENT: BR0/1/0: 
Occurred at ../isdn/isdnif_rxstate.c:6371

The user who wants to establish the call, gets after
some seconds a busy signal. The remote user can see a
incoming call. It only rings one time. The remote user
has no chance to answer this call.

Here a cut of my config:
BRI0/1/0 : --> PSTN
BRI0/1/1 : --> Fax Server with ISDN card

interface BRI0/1/0
  no ip address
  isdn switch-type basic-net3
  isdn overlap-receiving
  isdn incoming-voice voice

  voice-port 0/1/0
  compand-type a-law
  cptone DE

dial-peer voice 60 pots
  description KielNET Flatrate
  max-conn 2
  destination-pattern 99T
  direct-inward-dial
  port 0/1/0



debug isdn q931

.Mar 29 12:57:19.555 MEST: ISDN BR0/1/0 Q931: Applying typeplan for 
sw-type 0x1 is 0x0 0x0, Calling num 524
.Mar 29 12:57:19.559 MEST: ISDN BR0/1/0 Q931: Applying typeplan for 
sw-type 0x1 is 0x0 0x0, Called num 01604755623
.Mar 29 12:57:19.559 MEST: ISDN BR0/1/0 Q931: TX -> SETUP pd = 8 
callref = 0x1E
         Bearer Capability i = 0x8090A3
                 Standard = CCITT
                 Transfer Capability = Speech
                 Transfer Mode = Circuit
                 Transfer Rate = 64 kbit/s
         Channel ID i = 0x81
         Calling Party Number i = 0x0081, '524'
                 Plan:Unknown, Type:Unknown
         Called Party Number i = 0x80, '016004755623'
                 Plan:Unknown, Type:Unknown
.Mar 29 12:57:19.795 MEST: ISDN BR0/1/0 Q931: RX <- SETUP_ACK pd = 8 
callref = 0x9E
         Channel ID i = 0x89
.Mar 29 12:57:19.795 MEST: ISDN BR0/1/0 **ERROR**: host_information: 
Unexpected INFO - call id 0xADAC
.Mar 29 12:57:23.695 MEST: ISDN BR0/1/0 Q931: RX <- ALERTING pd = 8 
callref = 0x9E
         Progress Ind i = 0x8288 - In-band info or appropriate now 
available
         Progress Ind i = 0x8082 - Destination address is non-ISDN
.Mar 29 12:57:23.699 MEST: ISDN BR0/1/0 **ERROR**: host_alerting: 
Unexpected Alert clearing the call
.Mar 29 12:57:23.699 MEST: %ISDN-4-ISDN_UNEXPECTED_EVENT: BR0/1/0: 
Occurred at ../isdn/isdnif_rxstate.c:6371
.Mar 29 12:57:23.699 MEST: ISDN BR0/1/0 Q931: TX -> DISCONNECT pd = 8 
callref = 0x1E
         Cause i = 0x8090 - Normal call clearing
.Mar 29 12:57:23.803 MEST: ISDN BR0/1/0 Q931: RX <- RELEASE pd = 8 
callref = 0x9E
.Mar 29 12:57:23.807 MEST: ISDN BR0/1/0 Q931: TX -> RELEASE_COMP pd = 8 
  callref = 0x1E



Any ideas ??
All other calls, which goes over the PRI interface works fine.
Also the another port of VIC2-2BRI-NT/TE= works without any problems.


Regards,
  Ahmad

-- 
Ahmad Cheikh-Moussa
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/




More information about the cisco-voip mailing list