[cisco-voip] trying to config hardware conferencing on 2851 router
Linsemier, Matthew
MLinsemier at apcapital.com
Tue Oct 10 12:05:10 EDT 2006
Heres an example config from a 2821, it should be the same. Depending
on the codecs that you use, your milage may vary on the available
sessions.
sccp local FastEthernet0/0
sccp ccm <CCM Sub IP> identifier 2 version 4.1
sccp ccm <CCM Pub IP> identifier 1 version 4.1
sccp ip precedence 3
sccp
!
sccp ccm group 1
associate ccm 2 priority 1
associate ccm 1 priority 2
associate profile 2 register XCODE_Michigan
associate profile 1 register CFB_Michigan
keepalive retries 5
switchover method immediate
switchback method immediate
switchback interval 15
!
dspfarm profile 2 transcode
description Michigan Hardware Transcoder
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec gsmfr
codec g729r8
codec g729br8
maximum sessions 5
associate application SCCP
!
dspfarm profile 1 conference
description Michigan Hardware Conference Bridge
codec g711ulaw
codec g729r8
codec g729ar8
codec g729br8
codec g729abr8
maximum sessions 4
associate application SCCP
-Matt
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Tuesday, October 10, 2006 11:57 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] trying to config hardware conferencing on 2851
router
trying to config hardware conferencing on 2851 router
can someone send me a example
---
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
CONFIDENTIALITY STATEMENT
This communication and any attachments are CONFIDENTIAL and may
be protected by one or more legal privileges. It is intended
solely for the use of the addressee identified above. If you
are not the intended recipient, any use, disclosure, copying
or distribution of this communication is UNAUTHORIZED. Neither
this information block, the typed name of the sender, nor
anything else in this message is intended to constitute an
electronic signature unless a specific statement to the
contrary is included in this message. If you have received this
communication in error, please immediately contact me and delete
this communication from your computer. Thank you.
More information about the cisco-voip
mailing list