[cisco-voip] TAPS - Multiple Appearance DNs
STEVEN CASPER
SCASPER at mandtbank.com
Wed Oct 11 17:28:43 EDT 2006
Got a response from the Cisco IP Telephony Forum that pointed me to
this:
Using TAPS to Configure Shared-line Phones
If you are planning to use TAPS to configure shared-line phones, you
must create unique external mask for each shared-line phone. Enter a
unique combination of numbers and asterisks (*) for the external mask.
For more information, see
http://www.cisco.com/pcgi-bin/Support/Bugtool/onebug.pl?bugid=CSCec20093.
>>> "Matt Slaga (US)" <Matt.Slaga at us.didata.com> 10/11/06 10:34 AM >>>
No, it's not a device limitation but a line limitation. When you call
into TAPS and input your number the database searches for that number.
If there is more than one, it doesn't know which profile to push out
and
fails. I'm not sure when or if they will fix this, but I wouldn't
imagine adding a few more IVR questions to determine which phone it
would be. Of course, to be of any use they would need text to speech
capabilities to read off the identifying records like "description"
and
"display".
________________________________
From: Steve G [mailto:smgustafson at gmail.com]
Sent: Tuesday, October 10, 2006 8:28 PM
To: STEVEN CASPER
Cc: cisco-voip at puck.nether.net; Matt Slaga (US)
Subject: Re: [cisco-voip] TAPS - Multiple Appearance DNs
I could be wrong (I've been before), but can't you use taps to
configure
the same DN on different phone types? Say, I have a 7960 and a 7912
with a shared DN.
Does that work?
On 10/10/06, STEVEN CASPER <SCASPER at mandtbank.com> wrote:
Thanks for the response.
Converting from a traditional PBX environment I consider that a
serious limitation. I wonder if there is any chance TAPS can be
used
with shared lines in a future release.
Steve
>>> "Matt Slaga (US)" <Matt.Slaga at us.didata.com> 10/10/06 6:02
PM >>>
You cannot use TAPS with shared lines.
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net ] On Behalf Of
STEVEN
CASPER
Sent: Tuesday, October 10, 2006 1:19 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] TAPS - Multiple Appearance DNs
Is there any way that TAPS can be used to add phones that have
Multiple
Appearance Directory numbers?
Thanks!
Steve
Steve Casper
Voice Technologies
M&T Bank
(410) 347-6026
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have
received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error,
please
notify us immediately by replying to this message and deleting
it
from your computer. Thank you.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
More information about the cisco-voip
mailing list