[cisco-voip] Send line busy when on 1st line
Wes Sisk
wsisk at cisco.com
Tue Oct 17 09:21:20 EDT 2006
you could configure line1 to callforwardbusy to voicemail and set
busy trigger=1 on the line.
however, this does not address how anyone will call line2. Should
line2 be callable on the system or is it reserved for outbound calls?
or possibly, is the customer thinking of line2 as the 2nd line to do
a transfer, in which case you can just use 1 line configured as above.
/Wes
On Oct 16, 2006, at 10:01 PM, Carter, Bill wrote:
I have a strange request from a customer. They will have DNs
configured on line 1 and 2. There will be no connection between the
two lines, they are just standalone lines (i.e. line partition 1,
line 2 partition 2).
Here is what they want. When they are talking on the first DN, they
don't want to receive calls on line 2. Basically they want the line
to ring busy.
Bill Carter
Sr. Business Communications Analyst
Sentinel Technologies
(O) 217.391.5015
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061017/3087d5de/attachment-0001.html
More information about the cisco-voip
mailing list