[cisco-voip] Line Groups and Call Pickup
May, Simon
Simon.May at ihsti.com
Thu Oct 19 10:44:31 EDT 2006
If you are on 4.1(3)sr3 CCM then there is an engineering Fix for this
issue.
In System, Enterprise Parameters, right at the bottom, under the heading
"Cisco Support Use" ...
Put the following code in the "Cisco Support Use 1" field.
CSCsb42763
This will allow call pickup within hunt groups.
If you are on 4.2 CCM then this feature is not supported at present,
until an engineering fix is released.
Hope this helps
Simon May
More information about the cisco-voip
mailing list