[cisco-voip] E1 trunk group on as5300
Fedorov, Konstantin
kfedor at amt.ru
Tue Oct 24 10:13:16 EDT 2006
Hi Klaus,
Both ways appropriate.
I prefer group ports if this ports lead to the same provider for
example.
-----------------------
Sincerely Yours,
Konstantin Fedorov
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Klaus Darilion
Sent: Tuesday, October 24, 2006 4:53 PM
To: cisco-voip
Subject: [cisco-voip] E1 trunk group on as5300
Hi!
I have an AS5300 with 4xE1 as SIP<->PSTN Gateway. For SIP--->PSTN calls,
I want to use all the E1 interfaces.
Can someone help me how to configure this?
Is it necessary to define a trunk and put the four E1 lines into the
trunk, or is it sufficient to have 4 identical pots dial-peers and the
router chooses the next dial-peer if on is congested?
thanks
Klaus
--
Klaus Darilion
nic.at
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list