[cisco-voip] 7961 phone on 3550 PWR switch (no power up, only led blinking)
Ryan Ratliff
rratliff at cisco.com
Tue Oct 31 08:59:05 EST 2006
Assuming you have a 7961G-GE (gigE port on the back) then you need a
3560. The 3550 doesn't fully support the AF power the phone requires.
-Ryan
On Oct 31, 2006, at 3:21 AM, Adam Obszynski wrote:
EHLO cisco-voip!
Im have bad working scenario with 7961 phone connected to 3550 PWR
switch. Phone leds up spekare button, then flashes all of line buttons
and reset. No kind of display on screen.
Debug on switch side show no error at all.
Phone connected with addition to power bar works fine.
Anyone expirienced this behavior?
--
\_/
mo0! ( _ ) -(_)-
~O o~__ / \
(._.)_|\
________|_|_|_____
CCIE #8557
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list