[cisco-voip] softkey template

[Justin Steinberg]

template1



On 8/20/07, Frazee, Timothy <Timothy_Frazee at adp.com> wrote:
>
> If I set a softkey template at the device pool level to "template1", and
> at the device it is set to "<none>", what is the resulting template?
>
> template1 or <none> ???
>
> Does anyone know how to batch change phones from a setting of "<none>"
> to "template1"? Just in case?
>
> I don't see a softkey template setting for update phones.
>
> Thanks.
>
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and confidential.
> If the reader of the message is not the intended recipient or an authorized
> representative of the intended recipient, you are hereby notified that any
> dissemination of this communication is strictly prohibited. If you have
> received this communication in error, please notify us immediately by e-mail
> and delete the message and any attachments from your system.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070820/79957a61/attachment.html