[cisco-voip] 4.2.3sr2b Hunt Pilot rings fast busy

[Wes Sisk]

are users configured to login/logout of hunt group?  are users logged  
in?
hunt list actually registers, does CM perfmon counter increment/show  
huntlist registered?

Any snippet of CM SDI traces?  Those should be pretty decent for  
showing the problem, especially if attempt a call from the same CM  
node where the hunt pilot registers.

/Wes

On Aug 27, 2007, at 2:08 PM, Jason Aarons ((US)) wrote:

I see a Hunt Pilot 3695 pointed to Hunt List, which points to Line  
Group with 2 members (8307,8338) in broadcast.  Hunt List is reset,  
shows good, reset a couple more times for good luck.  All CSS have  
correct partitions, etc. No shared lines anywhere. No duplicate  
numbers on Hunt Pilot or unassigned dns, etc.



I get fast busy dialing Hunt Pilot 3695. I tried changing 3695 to  
5555 as we have no numbers beginning with 5....reset Hunt List, still  
fast busy…



I’ve set this up hundreds of times with no problems, maybe a bug with  
4.2.3sr2b?





Disclaimer: This e-mail communication and any attachments may contain  
confidential and privileged information and is for use by the  
designated addressee(s) named above only. If you are not the intended  
addressee, you are hereby notified that you have received this  
communication in error and that any use or reproduction of this email  
or its contents is strictly prohibited and may be unlawful. If you  
have received this communication in error, please notify us  
immediately by replying to this message and deleting it from your  
computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip