[cisco-voip] how to map DIDs to extensions during SRST

[Ted Nugent]

Do your DID line up with your internal extensions?
6135551212 = 61212? 
If so you can use the dialplan-pattern command in
call-manager-fallback mode

dialplan-pattern 1 613555.... extension-length 5
extension-pattern 6....

otherwise you can use individual translation profiles
which can be a bitch if you have a bunch of users





--- Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> I am unclear as to how I map an incoming DID to an
> extension in DID. I don't think I can use dial-peers
> because the dial-peers are not setup with the
> correct ports until the phones register.
> 
> Am I supposed to use the alias command or the
> dial-plan command in the call-manager-fallbackup
> section?
> 
> I want to make sure that this doesn't interfere with
> the immediate dialing of extensions while in srst
> mode. for example, the alias will be something like
> 6135551212 but they will have extensions 61xxx on
> the site.
> 
> Comments?
> 
>
--------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph *
> Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> ...there's no such thing as a bad timbit...
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 




 
____________________________________________________________________________________
Need Mail bonding?
Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
http://answers.yahoo.com/dir/?link=list&sid=396546091