[cisco-voip] how to map DIDs to extensions during SRST

[Lelio Fulgenzi]

unfortunately, we can't control the DID ranges in some cases. these may have been faxes assigned numbers in no particular order.

  ----- Original Message ----- 
  From: Robert Kulagowski 
  To: Lelio Fulgenzi 
  Cc: cisco-voip at puck.nether.net 
  Sent: Saturday, February 03, 2007 1:40 AM
  Subject: Re: [cisco-voip] how to map DIDs to extensions during SRST


  Lelio Fulgenzi wrote:
  > Thanks Robert, I think this is might be what I'm looking for.
  >  
  > Only thing is, it seems that I can only have one "translation-profile 
  > incoming" on the voice port, and only one "translate called" ont he 
  > translation profile. This means, with the max of 15 rules per 
  > translation rule, I can only have 15 DIDs (assuming no extension matching).
  >  
  > Is that right? There has to be a way to scale this a bit more. No?

  Well, this is for a DID _range_, so if my DID range is 1600-1699, and 
  the PSTN is delivering 4 digits, an incoming call for 1678 will then 
  have my translation pattern stripping "16", replacing it with 3316 and 
  then adding on the last two digits, so now the inbound call is 331678.

  So, I'm deleting two digits and then essentially sticking them back in, 
  except with two additional digits in front (my site code) which now 
  matches my internal extension of 331678.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070203/715b6399/attachment.html