[cisco-voip] how to map DIDs to extensions during SRST

[Lelio Fulgenzi]

It will be a fax on a VG224 that I want to make sure still works.

Why doesn't the FXS port register with the router upon SRST?

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

  ----- Original Message ----- 
  From: Robert Kulagowski 
  To: Lelio Fulgenzi 
  Cc: cisco-voip at puck.nether.net 
  Sent: Monday, February 05, 2007 7:06 AM
  Subject: Re: [cisco-voip] how to map DIDs to extensions during SRST


  I guess I'm still not following then.  Are you trying to translate 
  incoming digits (PSTN is sending 4, but you have 6-digit internal) or 
  are you trying to do something else?

  Is this a fax problem, or a IP phone issue?  Because for faxing, we have 
  to hard-code the FXS ports with 6-digit destination-patterns.  IP phones 
  just register with the router when they go into SRST mode.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070205/7639bd8f/attachment.html